User Manual
13
Creating Sounds
Editing a program means changing the Program’s parameters to alter its
sound.
There are two way to create sounds on the monologue.
•
Select an existing Program that’s close to the sound you want, and edit that
Program’s parameters to achieve your own custom sound.
•
You can also initialize all the Program parameters or use the Panel Load func-
tion to create your own sound from scratch.
Editing an Existing Program
1.
In Program mode, select the Program that you want to use as a starting
point.
2.
Use the knobs and switches on the front panel.
Take a moment to consider the dierences between the current Program
and the sound you have in mind, and use the front panel controls to edit
the necessary parameters.
TIP
F
or details on how the pitch, sound, and volume change when using
the knobs and switches, refer
to “Basic Parameter Editing” (p. 15).
We recommend that you save the Program on the monologue after
editing the sound. Any edits that you make will be lost if you turn o
the power or recall a dierent Program. For details, refer to “Saving a
Program” (p. 14).
Creating a Program from Scratch
To create a sound from scratch, we recommend that you use the Panel Load
function. This will load the current seings of each front panel control and
provide a simple starting point for your iconic creations.
As you explore the front panel controls, you can see how each parameter will
aect the sound, making it easier to understand how each section of the mono-
logue functions and how the parameters interact.
Panel Load function
When the PLAY buon is pressed while holding down the SHIFT buon, the
panel load function will be enabled. The sound will change to reect the panel
seings, and "Load Panel" will be indicated on the display.