User Manual

19
EG
EG: Envelope Generator
You can make time-based changes to
the VCA, pitch or cuto by using the
EG.
TYPE switch [ , , ]
The seings made here will change the VCA and TARGET parameters over
time, as shown below.
When using GATE, time-based changes cannot be made to the VCA.
ATTACK knob [0...1023]
The ATTACK species the time required for the EG to reach its maximum level
once a new note is played.
DECAY knob [0...1023]
When the TYPE switch is set to “A/D” or “GATE”, this sets the amount of time
until the level becomes 0 after the maximum level is reached.
When the TYPE switch is set to “A/G/D”, this sets the time from note-o (when
the key is released) until the level reaches 0.
TYPE
VCA
（Amp EG）
Attack Decay
0
Attack Decay
0
0
TARGET settings
Int
Attack Decay
0
Int
Attack Decay
0
Int
Attack Decay
0
PITCH, PITCH 2 (Pitch EG),
CUTOFF (Filter EG)
(GATE)
(A/D: Attack/Decay)
(A/G/D: Attack/Gate/Decay)