User Manual
25
Deleting a Motion Sequence
If you try to record a fth Motion Sequence, the message “Motion Full” will be
indicated in the display. When this happens, the display will enter MOTION
CLEAR in the SEQ EDIT mode, and you will be able to delete one of the previ-
ously recorded Motion Sequences.
1.
Check that the monologue is on the MOTION CLEAR function, in the
SEQ EDIT mode.
“MOTION CLEAR” will be indicated in the display. You can delete Motion
Sequences one at a time here.
TIP
Press the EXIT buon to cancel deleting the Motion Sequence.
2.
Press buon 10, and select the motion to delete.
3.
Turn the PROGRAM/VALUE knob to select the message “CLEAR...?”.
4.
Press the WRITE buon.
The selected Motion Sequence will be deleted.
5.
Press the EXIT buon.
6.
To continue recording a Motion Sequence, press the REC buon, and
press the PLAY buon to stop.
TIP
To delete all Motion Sequences at once, use the “Motion Clear” func-
tion assigned to buon 7 in the SEQ EDIT mode. For details, refer to
“Motion Clear” (p. 36).
12345678910 11 12 13 14 15 16
5
2
4
3