User Manual

28
Edit Mode
Although nearly all of the monologue’s main parameters can be edited using
the knobs and switches on the panel, other detailed parameters are accessed
using the Edit mode.
There are three sub-modes within the Edit mode: PROGRAM EDIT mode,
SEQ EDIT mode, and GLOBAL EDIT mode.
How to enter the Edit mode
1.
Press the EDIT MODE buon.
Each Edit mode is shown in the display, and the buons light.
2.
Press the EDIT MODE buon repeatedly—or use the PROGRAM/VAL-
UE knob—to advance to the PROGRAM EDIT mode, SEQ EDIT mode, or
GLOBAL EDIT mode.
PROGRAM EDIT mode: This mode is used to change the Program name
and assign a parameter to the slider, as well as to initialize Programs and
perform other Program editing functions.
SEQ EDIT mode: This mode is used to set the BPM and congure other
Step Sequencer seings, to delete sequence data, and so on.
GLOBAL EDIT mode: This mode is used to set the tuning and to specify
how the knobs and switches should function, as well as seings that aect
the entire synthesizer—such as MIDI.
12345678910 11 12 13 14 15 16
1, 2
2, 5
3
4, 6