User Manual
29
3.
Press one of buons 1–16 that are lit up.
The monologue will enter the respective Edit page, and the parameter
names will be indicated on the display.
Switch to a dierent page by pressing the same buon in succession.
Refer to “Edit Mode Parameter List” (p. 30) for a list of the parameters on
each edit page.
4.
After you have congured the parameters in PROGRAM EDIT mode
and/or SEQ EDIT mode, press the WRITE buon to save your changes.
The display will indicate the message “Where to write?”.
If you do not save your changes and select another Program after you
have congured the parameters in the PROGRAM EDIT mode and
the SEQ EDIT mode, your seings will be lost.
TIP
GLOBAL EDIT mode parameters are automatically saved when you
switch pages, so there is no need to save them manually. Press the
EXIT buon to return to Play mode.
5.
Use the PROGRAM/VALUE knob to select the destination Program num-
ber where you will save your edited sound.
Press the EXIT buon to cancel the save operation and return to Play mode.
6.
Press the WRITE buon to save the seings and return to the Play mode.