User Manual
35
Button 12 (DUMP)
This buon initiates a Program dump.
Turn the PROGRAM/VALUE knob until “Press WRITE” is indicated in the dis-
play. The WRITE buon will blink.
Press the WRITE buon to send a SysEx Program dump from the monologue’s
MIDI OUT and USB B connector. The display will indicate the message “Pro-
gram Dump”.
SEQ EDIT mode
Button 5 (BPM)
BPM [10.0...600.0]
This parameter sets the tempo of the Sequencer in Beats Per Minute (BPM).
Button 6 (SEQ PARAMETER)
This group provides control of various Sequencer timing and resolution pa-
rameters such as Gate Time, Swing, etc.
Step Length [1...16]
Step Length allows you to set the number of steps used by the Step Sequencer.
TIP
You can also set the number of steps by turning the PROGRAM/VAL-
UE knob in step recording.
Step Resolution [1/16, 1/8, 1/4, 1/2, 1/1]
The Step Resolution is used to set the length of each Step Sequencer step.
1/16: A single step will be set to the length of a sixteenth note.
1/1: A single step will be set to the length of one measure. Use this when you
want to play long chords.
Swing [−75%...+75%]
The Swing parameter adjusts the intensity of the swing.
Default Gate Time [0–100%]
The Gate Time is the default value used for each step recorded using the Step
Sequencer. Lower values are more staccato, higher values have a longer gate
time.