User Manual

41
Button 5 (GLOBAL 3)
These parameters relate to the SYNC IN/SYNC OUT jack seings.
Sync In Unit [16th Note, 8th Note]
The Sync In Units determine how much the Sequencer will advance with each
pulse received via the SYNC IN jack.
16th Note: The Sequencer will advance one sixteenth note for each pulse.
8th Note: The Sequencer will advance one eighth note for each pulse.
TIP
When Step Resolution in the SEQ EDIT mode is set to 1/16, a sixteenth
note will be equal to one step, and an eighth note will be equal to two
steps.
Sync Out Unit [16th Note, 8th Note]
The Sync Out Units determine how far the Sequencer needs to advance in or-
der to generate a pulse via the SYNC OUT jack.
16th Note: A pulse will be outpued for every sixteenth note.
8th Note: A pulse will be outpued for every eighth note.
TIP
When Step Resolution in the SEQ EDIT mode is set to 1/16, a sixteenth
note will be equal to one step, and an eighth note will be equal to two
steps.
Sync In Polarity [Rise, Fall]
In order to achieve synchronization with other units, the polarity of the SYNC
IN jack may need to be changed.
Rise: The monologue will sync to the pulse as it rises to its crest (the highest
point) of the waveform.
Fall: The monologue will sync to the pulse as it falls to its trough (the lowest
point) of the waveform.
Sync Out Polarity [Rise, Fall]
In order for other units to correctly sync with the monologue, the polarity of
the SYNC OUT jack may need to be changed.
Rise: The monologue will create a sync pulse as it rises to its crest (the highest
point) of the waveform.
Fall: The monologue will create a sync pulse as it falls to its trough (the lowest
point) of the waveform.