User Manual
43
Button 7 (GLOBAL 5)
These parameters relate to the monologue’s display, and what information is
seen there.
Parameter Disp [Normal, All]
Normal: Only major information such as operating the pitch-related knobs or
switching the MOTION/SLIDE/NOTE switch will be displayed.
All: When any knob except for the MASTER knob is turned, the value is indi-
cated; and when operating a switch, the seing is indicated.
When the MOTION/SLIDE/NOTE switch is set to “MOTION”, the
values and seings will not be displayed.
Button 8 (GLOBAL 6)
Congures the type of baeries to be used on the monologue, as well as the
display and power seings.
Battery Type [Alkaline, Ni-MH]
In order to accurately detect the remaining baery power, select the type of
baery being used.
Alkaline: Use this seing for alkaline baeries.
Ni-MH: Use this seing for nickel-metal hydride baeries.
The remaining baery level will not be indicated correctly while an
AC adapter (sold separately) is connected.
Auto Power O [O, On]
Using the Auto Power O feature, the monologue can be set to automatically
turn o after approximately four hours have elapsed without any operation of
the knobs, switches, or keyboard, and without any input. Once this occurs, you
will need to turn the monologue on again manually.
O: The Auto Power O feature will be disabled.
On: The Auto Power O feature is enabled. For details, refer to “Auto Power
O Feature” (p. 8)
Brightness [1...10]
Adjusts the display brightness.
Continuous use of the monologue while the brightness is set to a high
value will have an adverse eect on the overall life of the display.