User Manual

44
Button 10 (USER SCALE)
USER SCALE 1...6
This allows you to set up to six original user scales. The pitches of all of the
notes can be changed to create scales with irregular pitches.
Pitches can be set in cents by turning the PROGRAM/VALUE knob. Turning the
PRO-GRAM/VALUE knob while holding the SHIFT buon will change the tun
-
ing in semitones (100 cents). For details, refer to “Microtuning function” (p. 46).
SysEx data for microtuning can be received while this parameter is
being displayed. This overwrites the scale currently being edited, re-
gardless of what number is specied in the message.
Button 11 (USER OCTAVE)
USER OCTAVE 1...6
This allows you to set up to six original octave scales. When one of the pitches
is changed within the octave, that seing will be reected throughout the en-
tire tonal range.
Pitches can be set in cents by turning the PROGRAM/VALUE knob. Turning the
PROGRAM/VALUE knob while holding the SHIFT buon will change the tun
-
ing in semitones (100 cents). For details, refer to “Microtuning function” (p. 46).
SysEx data for microtuning can be received while this parameter is
being displayed. This overwrites the scale currently being edited, re-
gardless of what number is specied in the message.
Button 12 (SCALE CLEAR)
USER SCALE 1...6
This initializes the microtuning that was edited using USER SCALE 1–6, buon 10.
Press buon 12 to select the microtuning to initialize. Turn the PROGRAM/
VALUE knob until "Press WRITE" is indicated on the display, and then press
the WRITE buon.
USER OCTAVE 1...6
This initializes the microtuning that was edited using USER OCTAVE 1–6, but-
ton 11.
Press buon 12 to select the microtuning to initialize. Turn the PROGRAM/
VALUE knob until "Press WRITE" is indicated on the display, and then press
the WRITE buon.