User Manual
45
Button 13 (SCALE DUMP)
USER SCALE 1...6
This transmits the microtuning that was edited using USER SCALE 1–6 as a
general SysEx message.
Press buon 13 to select the microtuning to transmit via SysEx. Turn the PRO-
GRAM/VALUE knob until "Press WRITE" is indicated on the display, and then
press the WRITE buon.
USER OCTAVE 1...6
This transmits the microtuning that was edited using USER OCTAVE 1–6 as a
general SysEx message.
Press buon 13 to select the microtuning to transmit via SysEx. Turn the PRO-
GRAM/VALUE knob until "Press WRITE" is indicated on the display, and then
press the WRITE buon.
Button 15 (ALL DUMP)
These parameters allow you to perform a dump of all the internal data, either
via MIDI or via USB.
All Dump (USB)
Turn the PROGRAM/VALUE knob until “Press WRITE” is indicated in the dis-
play. The WRITE buon will blink.
Press the WRITE buon to transmit the MIDI data dump via the USB B connec-
tor. The display will indicate the message “Transmiing”. The data will take
about 10 seconds to transmit.
If the USB cable is not connected, or if the MIDI IN port on the PC is
not open, the data will not be transmied.
All Dump (MIDI)
Turn the PROGRAM/VALUE knob until “Press WRITE” is indicated in the dis-
play. The WRITE buon will blink.
Press the WRITE buon to transmit the MIDI data dump via the MIDI OUT
connector. The display will indicate the message “Transmiing”. The data will
take about 30 seconds to transmit.