User Manual
48
Restoring the Factory settings
You can restore the monologue’s preset Programs and global seings to their
original factory-set state at any time.
1.
Begin with the monologue turned O.
2.
While holding down the WRITE buon and the EXIT buon, turn the
monologue On.
“FACTORY RESET” will be indicated in the display.
3.
Turn the PROGRAM/VALUE knob to select the items you wish to reset
to the factory default seings.
PRESET: Restores the preset Programs (Programs 1–80) to their factory-set
default seings.
This will replace the existing preset Programs with the factory-set
default Programs. If you want to keep the existing preset Programs
beforehand, press the WRITE buon to save the presets to the user
Programs (Programs 81–100).
GLOBAL: Restores the GLOBAL seings to their factory default seings.
This also includes any favorite Programs that you have registered.
ALL: Restores the preset Programs (Programs 1–80), Programs 81–100, and
GLOBAL seings to their factory-set default seings.
Use caution, as this will replace all data with the factory-set default
seings (which will erase your user Programs).
4.
Press the WRITE buon.
The display will indicate the message “Are you sure?”.
5.
Turn the PROGRAM/VALUE knob to select “Yes”, and press the WRITE
buon.
The factory-set default data will be reloaded, and the monologue will be
restored to its factory default state.
TIP
Press the EXIT buon, or select “No” using the PROGRAM/VALUE
knob and press the WRITE buon to cancel the operation.
Never turn o the monologue while data is being loaded.