User Manual

5
Rear Panel Connections
The illustration below shows a typical example of connections for the mono-
logue. Connect your equipment according to the needs of your own system.
Be sure that the power on all of your devices is turned o before you
make connections. Leaving the power on when you make connections
may cause malfunctions, or damage your speaker system and other
components.
Connecting to audio devices
•
Connect your powered monitor speaker, mixer or other components to the
OUTPUT jack (monaural output) of the monologue. Adjust the volume level
using the MASTER knob.
•
Connect your headphones to the headphones jack. This jack outputs the same
signal as that of the OUTPUT jack.
•
Connect external sound sources, such as another synthesizer, to the AUDIO
IN jack (monaural input).
USB B connector
Power switch
MIDI IN, OUT connectors
SYNC IN
, OUT jacks
AUDIO IN jack
OUTPUT jack
Headphones
jack
DC 9V jack
Computer
Mixer
Sound module, rhythm machine, etc.
MIDI keyboard, rhythm machine, etc.
Groove machine
Microphone
Monitor speakers
(with internal amp)
Headphones
USB cable
MIDI OUT
MIDI IN
SYNC IN
USB port
INPUT
OUTPUT
AC adapter
(sold separately)
MIDI cable
SYNC cable