KORG Legacy Collection ANALOG EDITION 2007 Installation/Setup guide E 1
Installation/Setup guide Contents of the package KORG Legacy Collection - ANALOG EDITION 2007 includes the following items. After opening the package, please check to make sure that you have everything. If any items are missing, please contact your dealer. CD-ROM KORG Legacy Collection - ANALOG EDITION 2007 Installation/Setup guide Software License Agreement USB Key Please note • All copyrights to the software of this product are the property of Korg Corporation.
Installation in Windows XP Installation in Windows XP Installation in Windows XP Here’s how to install the software into Windows XP. 1 Insert the CD-ROM into the CD drive, and follow the on-screen instructions to proceed with the installation. 2 When installation is completed, [Exit Setup] to close the installer. 3 Start up your web browser, type “http://www.korguser.net” in the address field, and connect to the Internet.
Installation/Setup guide 11 The “Enter Activation Code” screen will appear. In the [Activation Code] field, carefully enter the code you wrote down in step 6, and then click [Enter]. If you did not enter the code correctly, a dialog box informing you of that fact will appear. Click [OK], and enter the code again. Once you use an activation code, you cannot use it again. 12 When you’ve entered the correct code, the screen shown at the right will appear.
Installation in Mac OS X Installation in Mac OS X To install the software in Mac OS X, be sure that your computer is connected to the Internet and proceed as follows. 1 Insert the CD-ROM into the CD drive, and follow the on-screen instructions to proceed with the installation. 2 3 When installation is completed, click [Restart] to restart your computer. 4 When your web browser has finished accessing the “KORG USER NET” user website, a log-in screen will appear.
Installation/Setup guide 12 When you’ve entered the correct code, the screen shown at the right will appear. Verify that the [License] area shows the name of the KORG Legacy Collection - ANALOG EDITION 2007 software, and click [Next]. 13 The “Download License” screen will appear. Click [Start]. The license data will be downloaded to the USB key. Please wait until this has been completed. When the license data has been downloaded successfully, a dialog box will inform you of this. Click [OK].
Cautions regarding the USB key Cautions regarding the USB key ● If the KORG Legacy Collection - ANALOG EDITION 2007 software will not start even though the USB key is connected, please check the following points. •If you’re using a USB hub, try connecting the key directly to a USB port on the computer itself to see whether it will work. You can also try removing all other connected USB devices except for the key. •Download the most recent driver for the USB key.
Installation/Setup guide Setup This chapter explains how to start up the stand-alone application after installation, and how to make preference settings so you can use it. Starting up Stand-alone application 1 2 3 Use a USB cable to connect the external MIDI device to your computer. Connect the USB-hardware key to your computer. Navigate to the “KORG” folder - “KORG Legacy” folder, and double-click the software synthesizer icon to start up the program.
Setup If audio interface is not installed, you will only be able to select “ Built-in audio controller.” Specify the audio output. Windows • If you selected ASIO in “Driver type” This will be unavailable and cannot be selected if an ASIO driver is not installed in your computer. “Driver” Select the driver (device) you will use. “Sampling Rate” Select the sampling rate you will use. The choices for “Sampling rate” will depend on the device you select for “Driver.
Installation/Setup guide “Sample Size” Specify the number of samples in one buffer. Higher settings will make operation more stable, but latency will be higher. Mac “Bits/Rate/Channel” Select the audio format you will use. The choices will depend on the device you selected as the “Output Device.” “Output Channel” If you selected “Built-in audio controller” as the “Output Device,” the only available setting will be Output 1/Output 2.
Setup Win: Is the connected device driver installed? Mac:Is the connected device detected in your computer? Mac:If the device you want to use does not appear in the selection for each port, navigate to the Application folder ➝ Utility ➝ “Audio MIDI Setup,” display the “MIDI device” tab page, and check whether the connected external MIDI device has been detected. Other settings 1 Click the “Other” tab. A dialog box with settings for operation (Knob Mode) and automatic stopping will appear.
Installation/Setup guide Support If you have questions about this product, please contact the Korg distributor for the country in which you purchased it. You can find your local distributor at http://www.korguser.net/distributors_list.htm In order to receive product support, you must have completed the product registration. Please understand that product support will not be provided if your registration cannot be verified.
IMPORTANT NOTICE TO CONSUMERS This product has been manufactured according to strict specifications and voltage requirements that are applicable in the country in which it is intended that this product should be used. If you have purchased this product via the internet, through mail order, and/or via a telephone sale, you must verify that this product is intended to be used in the country in which you reside.
