User's Manual

9
About the available recording tim
Availablerecordingtimepercardvarieswiththerecordingformatsetting
(seepage14).Thefollowingtableshowstheapproximaterecordingtime
availableineachformatper1GBofmemorycardcapacity.
Availablerecordingtimevalueslistedaboveareestimates.Maxi‐
mumrecordingtimewillbecomeshorterasthenumberofpro
jectsin
the
cardincreases.
Maximumrecordingtimeperprojectissix(6)hours.
2. Connecting your monitor equipment
Connectstereoheadphonesorexternalaudioequipment(suchasanampli‐
fier)totheheadphonejack.UsetheVOLbuttonstoadjustthevolume.Ifyou
arerecordingfromthebuilt‐inoranex terna lmicrophone,werecommend
thatyoumonitorthroughheadphonestoreducetherisk ofacousticfeedback.
3. Turning the power on/off
YoumustobservethefollowingprocedurewhenturningtheMR‐2onoroff.
Turning the power on
PressthePowerb utton.Aftertheopeningscreen,themeter/counter
screenwillappear.IftheMR‐2isrunningonthebatteriesandthepower
willnotturnon,thereisinsufficientbatterycharge.Replacethebatteries.
Turning the power off
PressandholddownthePowerbuttonforatleasttwo(2)seconds.Theshut‐
downscreenwillappear ,andseveralsecon dslaterth epow erwillturnoff
automatically.
Auto shutdown function
Afteryou’vestoppedtherecorderandacertainlengthoftimeelapses
withoutanyoperationsbeingperformed,theshutdownscreenwill
appearautomaticallyandthenthepowerwillturnoffseveralseconds
later(seepage31).
Format Recordabletime Format Recordabletime
MP2 48kHz/192kbps 660minutes WAV96kHz/24bit 25minutes
MP3
44.1kH z/192kbps 600minutes WAV 176.4kHz/24bit 15minutes
WAV
44.1kHz /16bit 90minutes WAV 192kHz/24bit 13minutes
WAV
44.1kHz /24bit 60minutes DSDIFF 22minutes
WAV48kHz/16bit 85minutes DSF 22minutes
WAV48kHz/24bit 55minutes WSD 22minutes
WAV88.2kHz/24bit 30minutes