User's Manual

3. IfyoucheckedWAV(BWF),usethecontrollerbuttonstoselectand

confirmthedesiredWavFormat:fs/bitsetting(bitdepthandsampling

frequency),andstereo(Stereo)ormono(DualMono).

Ifyouselected“176.4kHz/24bit”or“192kHz/24bit”forthefs/bit

setting,“Stereo”willautomaticallybeselected.

IfyoucheckedMP2orMP3,usetheco

ntrollerb

uttonstoselectand

confirmthedesiredMP2/3bitrate:bpssetting,andstereo(Stereo)or

mono(Mono).

IfyoucheckedDSDIFF,DSF,orWSD,asamplingfrequencyof

2.8224MHzwithstereowillbespecified.

4. Whenyouhavefinishedsettingtherecordingformat,presstheMENU

buttontoreturntotheme

nulist

screen,andthenpresstheMENUbut‐

tononceagaintoreturntothemeter/counterscreen.

Adjusting the recording input level

Hereishowtoadjusttherecordinglevel.TheMR‐2enablesyoutoadjust

thegainmanually(“Manual”)orautomaticallyaccord ingtotheinput

level(“Auto”).WhentheMR‐2isshippedfromthefactory,thisparameter

issetto“Manual.”Ifyouwanttoadjustthemicrophonesensitivity,set

thelowcutparameter

fortheinputsignal,orselectthe“A u t o ” levelfunc‐

tionandadjustdetailedsettings,referto“Modifyingtherecording

parametersettings”onpage20.

If you've selected WAV or MP2/3

Push