User's Manual
Table Of Contents
- A few words from Greg Mackie.
- Selecting channels for a Mute Group.
- MAIN MIX (L/R) fader.
- Group Master Section.
- BREAK button/indicator
- MONITOR section
- STEREO IN knob
- Meter section.
- FX Master Section.
- Talkback.
- A better way.
- A traditional Monitor Mix.
- Musician's Phones.
- Aux Master AFL buttons and indicator.
- Aux Master.
- Master Control Section
- Further reading about mixing.
- A few more tips on equalization.
- MID EQ (stereo channels)
- Source Mic / Line (stereo channels).
- PFL switch / indicator
- Same as Mono Channels
- Different than
- Channel fader
- Bus Assign switches
- —20 (Signal present) LED.
- Mute button/ indicator.
- Pan.
- FX Send.
- Aux PRE Switch.
- Aux Sends
- EQ (Equalization), Mono Channels
- Comp (Compressor) and indicator.
- Gain Control.
- Mono Channel Strips.
- Channel 25-26 (or Channels 17-18) and Phones
- Musician Phones (AUX OUT 3 OR 4 + L/R INJECT)
- Aux Out.
- Group Out (sub buses).
- Monitor Out.
- Main Out.
- Talkback input.
- Foot Switch input.
- USB Out
- USB In
- USB input / output.
- Stereo input channels.
- Mono input channels.
- Power input connector
- POWER switch
- Power supply section
- Why do we start with the back of the mixer?
- How the band is set up on the mixer.
- The "pusha-bunch-'0' buttons" approach to creating a mute group.
- Un-doing the "pusha-bunch-'0' buttons" approach to creating a mute group.
- Program a Mute Group…
- Rack mounting (MW-2408 only)
- Settings that can be saved
- More on Factory Reset (restoring the factory default settings).
- Other GLOBAL options.
- Recalling a Global Scene
- Saving a Global Scene
- Global menu (scene memory, settings, initialization).
- Locking the state of the feedback suppressor
- Feedback Suppressor: Seting routing options.
- Recalling an Equalizer Setting (continued)
- Recalling an Equalizer Setting.
- Saving Equalizer settings.
- Adjusting (Narrow Mode) Continued
- Adjusting EQ Narrow Mode EQ (31 /9-band).
- Adjusting 9-band EQ (Wide Mode).
- Selecting Narrow or Wide 9-band equalization.
- Recalling a Dynamics preset.
- Saving a Dynamics setting.
- FEEDBACK SUPPRESSOR
- EQUALIZATION
- SoundLink Signal Processing*
- Gee, they don't sound like effects!
- Recalling a DFX preset.
- Saving a Digital Effects setting.
- Using the TAP button to set the delay time.
- Editing an effect
- Applying a Digital Effect
- Selecting the DFX type
- Digital Effects (DFX).
- Saving and Recalling Mute Groups.
- Combining Hard Mutes and Mute Groups.
- Adding to or subtracting channels from a Mute Group.
- Creating a Mute Group.
- "Hard muting".
- OL (Overload) LED.
Hook-up/Back panel Analog Controls Digital Controls
HYBRID ANALOG/DIGITAL MIXER
GLOBAL
SETUPANTI-FEED OVERVIEW ANALYZER
SELECTTAP
RESET
:
REV HALLP01 -02
:
REV ROOMP03-04
:
REV VOCALP05-06
:
REV STAGEP07-08
:
REV PLATEP09- 1 0
:
REV SPRINGP 1 1 - 1 2
:
DELAYP 13-16
:
MOD FXP 17-20
:
TEST SOUND
P21-24
MULTIBAND DIGITAL PARAGRAPHIC EQ
DYNAMICS
FEEDBACK
EQUALIZER
DFX
INFO VIEW
AUX
2
MAIN
L/R
AUX
2
AUX
1
EXIT
SELON
MAIN
L/R
AUX
1
MENU
SAMPLE
HYBRID ANALOG/DIGITAL MIXER
GLOBAL
SETUPANTI-FEED OVERVIEW ANALYZER
SELECTTAP
RESET
:
REV HALLP01 -02
:
REV ROOMP03-04
:
REV VOCALP05-06
:
REV STAGEP07-08
:
REV PLATEP09- 1 0
:
REV SPRINGP 1 1 - 1 2
:
DELAYP 13-16
:
MOD FXP 17-20
:
TEST SOUND
P21-24
MULTIBAND DIGITAL PARAGRAPHIC EQ
DYNAMICS
FEEDBACK
EQUALIZER
DFX
INFO VIEW
MAIN
L/R
AUX
2
AUX
1
MAIN
L/R
AUX
2
AUX
1
MENU EXIT
SEL
ON
Digital Controls Digital Eects
39
If you press the RESET
button, the currently-
edited parameter returns
to its default value.
If you long-press the
RESET button, the
currently-edited eect is
initialized.
Depending on the
settings, the sound might
be distorted or produce
oscillation.
Using the TAP button to
set the delay time.
For delay effects, you can set the
delay time by pressing the
TAP
button at the desired interval.
You can use the
TAP button for
the following effects.
● - Delay Analog
● - Tape Echo
● - Delay Standard
● - Delay SDD3000
Select a delay effect type.
The TAP button blinks at
intervals of the time param-
eter setting.
Repeatedly press the TAP
button at the interval that
you want to specify.
The time is specified
according to
the average
value of the
intervals between button
presses.
Saving a Digital Eects
setting.
You can edit an effect and save
it as a user type (maximum 30),
and then recall it at any time.
After you have made adjust-
ment to an effect, press the
MENU button, which will
light up green.
On-screen you will see Save
User Type and Erase User
Type options.
Use the button under Select to
pick Save as User Type.
Scroll up or down with
▼ and ▲, or the encoder
knob, pick an Empty loca-
tion and press Select.