Quick Start Guide

Connecting the audio inputs |137
Audio In Meaning
Guitar The LEFT audio input will go to the Guitar Processor (included in the FX
block), then to the nal mix, together with the sounds generated by Pa700.
The RIGHT audio signal will be replicated on both audio outputs. Both
inputs will be recorded when recording an MP3 Song.
Adjusting the audio input gain
After connecting an audio device, you can adjust the input gain.
1 Be sure the MIC/IN indicator is turned on in the Main page > Volume pane of
the Style Play or Song Play mode. If not, touch it to turn it on.
2 If you connected a microphone or guitar, use the MIC/GTR GAIN knob next
to the LEFT audio input to adjust the input gain (the level goes from 0 to
40 dB). If you connected a line audio device, adjust the audio level from the
external device.
Check the input level by watching at the MIC/IN label in the Main page >
Volume pane while you sing or play.
MIC/IN color Meaning
Off No signal entering.
Green Low- to mid-level signal entering.
Orange Slight overload in the signal path.
Red Clipping is occurring in the signal path.