Quick Start Guide

Connecting the audio inputs |139
Turning the audio input on and adjusting the volume
The audio input can be quickly turned on or off, and its volume in the mix
adjusted, right from the main page. Please note that, for safety reasons, the
input level is always set to zero when turning the instrument on.
1 Go to the Main page > Volume pane of the Style Play or Song Play mode.
2 Use the Play/Mute button of the MIC/IN channel to turn the audio input on
or off.
3 Adjust the audio input volume by using the slider of the same channel.
As an alternative, with the default settings, use the ASSIGNABLE KNOB 1 to
adjust the volume.
Start the automatic accompaniment or a Song, to balance the audio input
against the internal Sounds.