Operation Manual

Recording the Styles and Pads |255

Position the input pointer

▪ The Pos parameter shows the current position. This is where you will insert

the next event.

▪ If you do not want to insert a note or chord at the current position, insert a

rest instead, as shown below.

▪ To jump to the next measure, ﬁlling the remaining beats with rests, touch the

Next M. button.

Choose a step value

▪ Use the Step Time values to choose the step value.

Choose the relative note duration

▪ Use the Duration parameter to set the relative note duration. The percent-

age is always referred to the step value.

Duration Meaning

50% Staccato

85% Ordinary articulation

100% Legato

Choose the note velocity

▪ Use the Velocity parameter to set the velocity or playing strength of the

event to be inserted.

Velocity Meaning

Kbd Keyboard. Select this parameter by turning the VALUE controls com-

pletely counter-clockwise. When this option is selected, the playing

strength of the played note is recognized and recorded.

1 … 127 Velocity value. The event will be inserted with this velocity value,

and the actual playing strength of the note played on the keyboard

will be ignored.

Insert a note or rest at the current position

▪ To insert a single note, play it on the keyboard. The inserted note length will

match the step length. You may change the velocity and relative duration of

the note, by editing the Duration and Velocity parameters.

▪ To insert a rest, touch the Rest button. Its length will match the step value.