Operation Manual

344| Customizing, recording and editing the Songs
3 Choose the Step Backing Sequence option and touch OK to access the Step
Backing Sequence page.
Event list
Step controls
Position indicator
Recording
While in edit, the events at the current position are shown by the right-point-
ing arrowheads ( ) on the left of the event.
1 Use the Measure parameter to go to the desired position in the Song, by us-
ing the VALUE controls.
As an alternatively, you can move the locator by using the step controls in
the lower area of the display.
Step control Meaning
Event Use these buttons to move to the previous or next recorded event.
Step Use these buttons to go to the previous or next step (1/8, or 192
ticks). If an event is located before the previous or next step, the
locator stops on that event. For example, if you are positioned on
M001.01.000, and no event exists before M001.01.192, the > button
moves to the M001.01.192 location. If an event exists on M001.01.010,
the > button stops to the M001.01.010 location.
Measure Use these buttons to move to the previous or following measure.
2 Select a parameter type (Style, Keyboard Set, Tempo…) to insert, edit or
delete at the current position.
3 Use the VALUE controls to modify the selected event. Delete it by touching
the Del button next to the event. When editing a parameter without the ar-
rowhead (
) next to it, a new event is inserted at the current position.
4 When finished editing, touch the Done button to exit from the Step Backing
Sequence recording mode.