Operation Manual

Effect parameters |607
j Wet/Dry Dry, 1:99…99:1,
Wet
Balance between the wet and dry signal
Src Off…Tempo See DMS (Dynamic Modulation Source)
Amt –100…+100 Amount of modulation source
LCR BPM Long Dly
The L/C/R delay enables you to match the delay time with the song tempo.
C Delay
R Delay
Left
Right
Feedback
Spread
FX Amt
FX Amt
FX Amt = 100: Mono In - Stereo Out / FX Amt = 0: Stereo In -Stereo Out
Input Level D-mod
High Damp
Low Damp
L Delay
Input Level D-mod
+
Level
Level
Level
Tempo
BPM
BPM
Base Note x Times
Base Note x Times
Base Note x Times
a BPM MIDI,
40.00…
300.00
MIDI syncs to the system tempo; 40–300
sets the tempo manually for this indi-
vidual effect
Time Over? ---, OVER! Displays an error message when the de-
lay time exceeds the upper limit
b L Delay Base Note
…
Selects the type of notes to specify the
delay time for TapL
Times x1…x32 Sets the number of notes to specify the
delay time for TapL
Level 0…50 Sets the output level of TapL
c C Delay Base Note
…
elects the type of notes to specify the
delay time for TapC
Times x1…x32 Sets the number of notes to specify the
delay time for TapC
Level 0…50 Sets the output level of TapC
d R Delay Base Note
…
Selects the type of notes to specify the
delay time for TapR
Times x1…x32 Sets the number of notes to specify the
delay time for TapR
Level 0…50 Sets the output level of TapR