Operation Manual

Effect parameters |683
Amp Tweed + Cab
As the above, plus cabinet.
a Drive 0…100 Sets the input gain
b Volume 0…100 Sets the output level
Src Off…Tempo Selects the modulation source for
the output level
Amt –100…+100 Sets the modulation amount of the
output level
c Bass 0…100 Sets the bass (low range) level
Middle 0…100 Sets the middle (mid range) level
d Treble 0…100 Sets the treble (high range) level
Presence 0…100 Sets the presence (high-frequency
tone)
e Cabinet Type TWEED - 1x12,
TWEED - 4x10,
BLACK - 2x10,
BLACK - 2x12,
VOX AC15 - 1x12,
VOX AC30 - 2x12,
VOX AD412 - 4x12,
UK H30 - 4x12,
UK T75 - 4x12,
US V30 - 4x12
Selects the cabinet type
f Cabinet Trim 0…100 Sets the input level
g Cabinet Air 0…100 Sets the mic position
h Noise Gate On/Off On, Off Switches Gate on/off
Threshold 0…100 Sets the level at which gating is ap-
plied
Attack 1…100 Sets the attack time
Release 1…100 Sets the release time
i Wet/Dry Dry, 1:99…99:1, Wet Balance between the wet and dry
signal
Src Off…Tempo See DMS (Dynamic Modulation
Source)
Amt –100…+100 Amount of modulation source