Operation Manual

756| Effects for the Sounds
a LFO Mode Loop, 1-Shot Switches LFO operation mode
Src Off…Tempo Selects the modulation source of LFO reset
b LFO Sync Off, On Switches between LFO reset on and off when
LFO Mode is set to Loop
c LFO Frequency
[Hz]
0.02…20.00 Sets the speed of the LFO
Src Off…Tempo Selects a modulation source for LFO speed
Amt –20.00…
+20.00
Sets the modulation amount of LFO speed
d MIDI Sync Off, On When this is on, the LFO speed is set by BPM,
Base Note, and Times, instead of Frequency
BPM MIDI,
40.00…
300.00
MIDI syncs to the system tempo; 40–300 sets
the tempo manually for this individual effect
Base Note
…
Selects the type of notes that specify the LFO
speed
Times x1…x32 Sets the number of notes that specify the LFO
speed
e Pitch Depth 0…100 Sets the pitch variation of the moving sound
Src Off…Tempo Selects the modulation source of pitch varia-
tion
Amt –100…+100 Sets the modulation amount of pitch variation
f Pan Depth –100…+100 Sets the panning of the moving sound
Src Off…Tempo Selects the modulation source of panning
Amt –100…+100 Sets the modulation amount of panning
g Wet/Dry Dry,
1:99…99:1, Wet
Balance between the wet and dry signal
Src Off…Tempo See DMS (Dynamic Modulation Source)
Amt –100…+100 Amount of modulation source
a: LFO Mode
a: Src
b: LFO Sync
The “LFO Mode” parameter switches LFO operation mode. When Loop is
selected, the Doppler effect will be created repeatedly. If “LFO Sync” is set
to On, the LFO will be reset when the modulation source specified with the
“Src” parameter is turned on.