Operation Manual

Effect parameters |765
P4EQ - Mt. Delay (Parametric 4-Band EQ - Multitap Delay)
This effect combines a mono four-band parametric equalizer and a multitap
delay.
Left
Right
FX Amt
FX Amt
FX Amt = 100: Mono In - Mono Out / FX Amt = 0: Stereo In - Stereo Out
Trim
+
Parametric 4Band EQ Multitap Delay
Feedback
High Damp
Delay
(2)
(1)
Mt.Dly FX Amt
P4EQ
a [E]Trim 0…100 Sets the parametric EQ input level
b [E]B1 Cutoff [Hz] 20…1.00k Sets the center frequency of Band 1
Q 0.5…10.0 Sets the bandwidth of Band 1
Gain [dB] –18…+18 Sets the gain of Band 1
c [E]B2 Cutoff [Hz] 50…5.00k Sets the center frequency of Band 2
Q 0.5…10.0 Sets the bandwidth of Band 2
Gain [dB] –18…+18 Sets the gain of Band 2
d [E]B3 Cutoff [Hz] 300…10.00k Sets the center frequency of Band 3
Q 0.5…10.0 Sets the bandwidth of Band 3
Gain [dB] –18…+18 Sets the gain of Band 3
e [E]B4 Cutoff [Hz] 500…20.00k Sets the center frequency of Band 4
Q 0.5…10.0 Sets the bandwidth of Band 4
Gain [dB] –18…+18 Sets the gain of Band 4
MULTITAP DELAY
f [D]Tap1 Time [msec] 0.0…1360.0 Sets the Tap1 delay time
Tap1 Level 0…100 Sets the Tap1 output level
g [D]Tap2 Time [msec] 0.0…1360.0 Sets the Tap2 delay time
Feedback (Tap2) –100…+100 Sets the Tap2 feedback amount
h [D]High Damp [%] 0…100 Sets the damping amount in the high
range