Operation Manual

Using the KAOSS effects |809
Using the KAOSS pad
Check the effect’s parameters assigned to the X/Y axis
▪ See the name of the parameters under the pad.
Axis Meaning
X Finger movement from left to right, right to left.
Y Finger movement from top to bottom, bottom to top.
Change the parameters’ value
▪ To change the parameters’ value, move your finger in the KAOSS pad.
Depending on the selected preset, the grid in the KAOSS pad will change.
Each cell corresponds to a block of values (also called a step). The lighter
grey cells are the default value for the corresponding parameter.
When no grid lines appear in the pad, values are continual, without interme-
diate steps, changing with a finer detail.
▪ When you release your finger, the default values are reset.