Manual

255
Global mode
Controllers: Hand Controllers
Reference
Controllers: Hand Controllers
In this page you can program those controls you can operate
with your hands.
Keyboard Settings
Velocity Curve
This parameter sets the sensitivity of the keyboard to your touch.
Fix No dynamic control available. Dynamic values
are fixed, as in a classic organ.
Soft1 … Hard3
Curves, from the lightest one to the hardest one.
Balance Control
Balance Slider
The BALANCE knob can either be used to mix between the
Keyboard and Accompaniment/Song tracks, or to control the
Accompaniment/Song Volume without changing the Keyboard
tracks. This is always a relative control, whose effective maxi-
mum value is determined by the MASTER VOLUME slider
position.
Note: The BALANCE knob only works in the Style Play and Song
Play modes.
Acc/Song - Kbd Balance
While in Style Play and Song Play mode, the
BALANCE knob balances the volume of the Key-
board (Kbd) tracks against the Style (Accompani-
ment), Song and Pad tracks.
Acc/Song Volume
While in Style Play and Song Play mode, the
BALANCE knob controls the volume of the Style
(Accompaniment), Song and Pad tracks.
Controllers: Foot Controllers
This page lets you select a function to the Assignable Pedal/Foot-
switch, and select the polarity for the Damper and Assignable
Pedal/Footswitch.
The following (optional) Korg pedals are compatible with Pa900:
Pedal/Footswitch
Function
Function assigned to a continuous (i.e., volume/expression)
pedal, or to a footswitch, connected to the ASSIGNABLE
PEDAL connector. See page 354 for a list of the assignable func-
tions. The first functions are switch-type functions, while the
remaining (starting from Master Volume) are continuous-like
functions.
Calibration
Use this button to calibrate and choose the polarity of the pedal/
footswitch.
1. Connect the pedal or footswitch to the ASSIGNABLE
PEDAL connector on the back of the instrument.
2. Go to this page, and touch the “Calibration” button in the
display. The following dialog box appears:
3. You are asked to set the pedal to the maximum value. Press
the footswitch, or press the pedal to the maximum position
(usually front pressed).
Type Model
Continuous
(Volume/Expression)
EXP-2, XVP-10
Switch PS-1, PS-3
Damper DS-1H (supporting half-pedalling)