Function added in system version 2.
RADIAS synthesizer/vocoder RADIAS operating system version 2.0 adds the following functions. Please read this document in conjunction with the “RADIAS owner’s manual” included with your RADIAS or RADIAS-R. Virtual Patch RADIAS version 2.0 adds the following parameters as virtual patch modulation destinations. This allows you even greater sound-making diversity. ☞p.
Function added in system version 2.0 If you want to use the joystick X-axis (left/right) as a modulation source for another parameter, set the following parameters to P.Bend according to the parameter that you want to control. • Virtual patch P11 PATCH “Source” (RADIAS owner’s manual p.91) • Vocoder P07: FILTER “FcModSrc” (RADIAS owner’s manual p.105) • Effect control source (St.Filter “Ctrl Src,” etc.; RADIAS owner’s manual p.
RADIAS synthesizer/vocoder When you operate a switch, a control change CC#80 (SW1) or CC#81 (SW2) will be transmitted on the MIDI channel of the timbre selected by TIMBRE SELECT. Switch-on will transmit a value of 127, and switch-off will transmit a value of 0. When CC#80 (SW1) or CC#81 (SW2) are received, the on/off status of the switch will change. A value of 64 or higher will turn the switch on, and a value of 63 or lower will turn it off.
Function added in system version 2.0 Global parameters So that you can connect the RADIAS to the 61-key/73key/88-key keyboard assembly used by the M3 music workstation/sampler and play the RADIAS from that keyboard, RADIAS version 2.0 adds the following functions as choices that can be selected in “MIDI1”– “MIDI5” (☞p.117 P04–1: MIDI page “MIDI1”– “MIDI5”).
4015-2 Yanokuchi, Inagi-city, Tokyo 206-0812 Japan 2007 KORG INC.
