Operation Manual

Applications

38 Korg 1212 I/O

English

For instance, let’s return once again to the conﬁguration of three ADATs

and a 1212 I/O, in which the 1212 I/O is connected at the end of the chain,

so that it sits in the optical loop between ADAT #3 and ADAT #1. The

1212 I/O can record the optical output of ADAT #3, and ADAT #1 can

record the optical output of the 1212 I/O. ADAT #2 does not directly

communicate with the 1212 I/O at all; it can only record the output of

ADAT #1, and play into ADAT #3.

To use the 1212 I/O effectively in this setup, you will need to either re-

patch the optical cables to let the 1212 I/O communicate with the desired

ADAT, or swap tapes between machines so that the desired tracks are on a

machine which is connected to the 1212 I/O.