Operation Manual

Wave Devices (Windows 95)
44 Korg 1212 I/O
English
Korg 1212 I/O Wave Device Control
Korg 1212 I/O Wave Device Control window
1212 I/O Card
The 1212 I/O Wave Device Control displays parameters for one 1212 I/O
card at a time. This menu displays the PCI bus number and PCI bus device
number of the currently selected card.
You can install multiple 1212 I/O cards in a single computer. Separate
wave device settings are maintained for each installed card.
To view or edit the settings of a different card, simply select it from the
menu; the sliders and check-boxes will be updated to reflect its current
settings.
Volume slider
Each stereo output pair has a volume slider, which controls the overall
output level for the wave device. To adjust the left and right channels
independently, use the balance slider in conjunction with the volume slider.
Moving the slider to the top of its range provides the maximum output
level; moving it to the bottom of its range will mute the output.
The volume control is only active when the device’s Vol/Bal On box is
checked. If your digital audio application provides its own volume
controls, then the volume control provided here may be unnecessary, and
you can save some CPU processing power by disabling it. For more
information, please see “Vol/Bal On” on page 45.
Please note that wave device volume and balance adjustment apply only to
output (playback). The 1212 I/O Utility program allows adjustment of the