Operation Manual

Wave Devices (Windows 95)
46 Korg 1212 I/O
English
all of the devices in the group have received the start command from the
digital audio program.
Note that this synchronization applies only to input and output pairs on
the same 1212 I/O card.
Auto Sync
When Auto Sync is checked, synchronization happens automatically.
Whenever you select or de-select a 1212 I/O input or output pair in your
digital audio program, Auto Sync will add or delete the pair from the
synchronization group.
This should work well for most applications; however, you can also disable
Auto Sync, and makes settings manually using the Custom Synchroni-
zation window (under the Custom button).
Custom…
Pressing this button brings up the Custom Synchronization window, which
allows you to manually control the 1212 I/O’s wave device
synchronization. For more information, see “Custom Synchronization,” on
page 47.
When Auto Sync is checked, the Custom button is disabled, and any
previous settings in the Custom Synchronization window will be ignored.
Save Settings
Pressing the “Save Settings” button saves the current card’s settings into
the Windows 95 System Registry. Once saved to the registry, these settings
become the default settings, and will be loaded into the card whenever the
system boots.
Retrieve Settings
Pressing the “Retrieve Settings” button restores the current card’s default
settings from the Windows 95 system registry. The default settings are
stored by the “Save Settings” button, described above.
Help
Pressing the “Help” button brings up the Microsoft Windows Help file for
the 1212 I/O, with lots of helpful, hypertext-linked information.
Exit
Pressing the “Exit” button quits the Korg 1212 I/O Wave Device Control.
Vol/Bal On: Set All and Clear All
Set All
Pressing this button sets all of the “Vol/Bal On” check-boxes at once.