Operation Manual

16
Selecting a bell for the accent
1. HolddowntheMETRONOMEbuttonuntiltheMetronomesettings
modeisentered.
2. PressthePIANO2buon,andtheaccentsoundseingwillappearin
thedisplay.
3. SelecttheseingwiththeUPorDOWNbuonbesidethedisplay.
The setting range consists of oFF (no accent sound), on1 (emphasized
sound for the accent beat) and on2 (bell sound for the accent beat); the de-
fault seing is oFF.
4. PresstheMETRONOMEbuontoexittheMetronomeseings
mode.
Specifying the tempo (Metronome settings mode)
1. HolddowntheMETRONOMEbuttonuntiltheMetronomesettings
modeisentered.
2. PresstheE.PIANO2buon,andthetempowillappearinthedisplay.
3. SpecifytheseingwiththeUPorDOWNbuonbesidethedisplay.
The seing range is
q
= 40–240; the default seing is 120.
To return to the default seing, simultaneously press the UP and
DOWN buons.
4. PresstheMETRONOMEbuontoexittheMetronomeseingsmode.
Selecting the Metronome Sound
1. HolddowntheMETRONOMEbuttonuntiltheMetronomesettings
modeisentered.
2. PresstheHARPSI/CLAVbutton,andthemetronomesoundsetting
willappearinthedisplay.
3. SpecifytheseingwiththeUPorDOWNbuonbesidethedis-
play.
The seing range consists of 1 (acoustic) and 2 (electronic sound);
the default seing is 1.
4. PresstheMETRONOMEbuontoexittheMetronomeseingsmode.
2
1,4
3
3
2
1,4
3
3
2
1,4
3
3