Operation Manual
Table Of Contents
- English
- Français
- Deutsch
- 中国語
- 日本語
19
Specifying layer pedals
In the Layer mode, a damper seing can be specied for
each sound.
The seings are only for the layer 1 sound (o – –), only for
the layer 2 sound (– – o) and for both sounds (o – o).
The default seing is o – o.
1. EntertheFunctionmode,andthenpresstheVIBES/
GUITARbuon.
The LED for the VIBES/GUITAR sound button lights
up, and the damper seing (o – o) appears in the dis-
play.
2. SelectthedamperseingwiththeUPorDOWNbut-
tonbesidethedisplay.
2
2
1
If the sound is in the Single mode, – – – appears in the
display, and a seing cannot be specied.
Specifying the auto power off function
When 30 minutes have passed without a key pressed in
the keyboard or without an automatic performance played,
the instrument is automatically turned o. To disable this
function, turn o (oFF) this function. The default seing is
this function turned on. If this seing is changed, the new
seing is saved and remains selected, even if the SP-280 is
turned o.
1. EntertheFunctionmode,andthenpresstheOR-
GAN1buon.
The LED for the ORGAN1 sound buon lights up, and
the seing (on) appears in the display.
2. Selecttheon/oseingwiththeUPorDOWNbut-
tonbesidethedisplay.
2
2
1
Usingdampers
The included damper pedal can be used to apply a
damping eect for only the player on the right side of
the keyboard.
Optional pedal unit (sold separately) can be used as
separate damper pedals for the le and right sides of
the keyboard.
Damper: Used as a damper pedal for the player on the
right side of the keyboard.
Sostenuto: Not used
So: Used as a damper pedal for the player on the le
side of the keyboard.
Specifying the volume balance for layers
The volume balance for sounds in the Layer mode (or the
Partner mode) can be adjusted. The seing range is 1 – 9...
9 – 9...9 – 1, with the number on the le for layer 1 (or the
le side of the keyboard) and the number on the right for
layer 2 (or the right side of the keyboard).
The default seing is 9 – 9.
1. Enter the Function mode, and then press the
E.PIANO2buon.
The LED for the E.PIANO2 sound buon lights up, and
the balance seing (9 – 9) appears in the display.
2. SpecifythevolumebalancesettingwiththeUPor
DOWNbuonbesidethedisplay.
To return to the default setting, simultaneously press
the UP and DOWN buons.
2
2
1
If the sound is in the Single mode, – – – appears in the
display, and a seing cannot be specied.
Specifying layer octaves
In the Layer mode, the octave for each sound can be speci-
ed. The seing range is ±1 octave for each sound, and –01,
00 and 01 appear in the display. The default seing is 00.
1. EntertheFunctionmode,andthenpresstheHARP-
SI/CLAVbuon.
The LED for the HARPSI/CLAV sound buon lights up,
and the layer (L1) whose octave is to be specified ap-
pears in the display.
2. SelectthelayerwiththeUPorDOWNbuonbeside
thedisplay.
L1 appears for layer 1, and L2 appears for layer 2.
3. PresstheBANKbuon.
The octave seing (00) appears in the display.
4. SelecttheoctaveseingwiththeUPorDOWNbut-
tonbesidethedisplay.
To return to the default setting, simultaneously press
the UP and DOWN buons.
To select the octave for the other layer, press the HARPSI/
CLAV buon to select the layer.
1
3
2,4
2,4
If the sound is in the Single mode, – – – appears in the
display, and a seing cannot be specied.