Operation Manual

20
Using push-knobs 1–8 and the touch pad as MIDI controllers
You can use push-knobs 1–8 and the touch pad (LCD display) as MIDI
controllers. Assignments for these controllers can be stored in the BANK 1–
4 buttons, and recalled simply by pressing a button.
1. Press the BANK 1 button to access the MIDI control
bank page. The BANK 1 button will light.
2. When you turn a push-knob 1–8, the MIDI message as-
signed to the respective encoder operation will be trans-
mitted.
3. When you push a push-knob 1–8, the MIDI message as-
signed to the respective switch operation will be trans-
mitted.
4. When you touch the LCD display (touch pad), the MIDI
messages assigned to touch, X-axis, and Y-axis opera-
tions will be transmitted.
5. You can use System Setup or the ZERO Edit application
to change these MIDI messages.
6. In the same way as for BANK 1, you can access the
BANK 2 – 4 pages and transmit the MIDI messages that
are assigned to the controllers in those banks.
FireWire Audio/MIDI device name list
MIDI Device
PortNo MIDI IN MIDI OUT Remarks
1 ZERO 1 ZERO 1 Only for ZERO Edit
2 ZERO 2 ZERO 2 Only for MIDI control-
lers
3 ZERO 3 ZERO 3 For external MIDI IN/
OUT connectors
Note: Depending on the application you’re using, the application
may display its own port name rather than obtaining the
name from the ZERO8.
Audio Device
PortNo Audio Input Corresponds to input jack
Audio Output Corresponds to output jack
(factory settings*1)
1 ZERO 1L CH 1 L
ZERO 1L CH 1 L PRE EQ
2 ZERO 1R CH 1 R
ZERO 1R CH 1 R PRE EQ
3 ZERO 2L CH 2 L
ZERO 2L CH 2 L PRE EQ
4 ZERO 2R CH 2 R
ZERO 2R CH 2 R PRE EQ
5 ZERO 3L CH 3 L
ZERO 3L CH 3 L PRE EQ
6 ZERO 3R CH 3 R
ZERO 3R CH 3 R PRE EQ
7 ZERO 4L CH 4 L
ZERO 4L CH 4 L PRE EQ
8 ZERO 4R CH 4 R
ZERO 4R CH 4 R PRE EQ
9 ZERO 5L CH 5 L
ZERO 5L CH 5 L PRE EQ
10 ZERO 5R CH 5 R
ZERO 5R CH 5 R PRE EQ
11 ZERO 6L CH 6 L
ZERO 6L CH 6 L PRE EQ