Manual

11
Please be aware that a remaking of an interchangeable cylinder results in additional
work and thus in additional expenses compared to the serial production.
8. Sight systems
All our revolver models have elevation and windage adjustable sights. The adjustments
are carried out by means of a screwdriver.
Sights
Model Combat / Model Sport / Model Target
8.1 Model Combat
8.1.1 Elevation adjustment
A screw is inserted in the vertical axis of the sight, which can be accessed from the
upper part of the sight. With this screw, the elevation of the sight can be individually
adjusted.
Before using the elevation adjustment screw, it is useful to slightly loosen the windage
adjustment screw, which is located at the side of the sights. A complete loosening of
the windage adjustment screw is not necessary. After the elevation adjustment is
performed, the windage adjustment screw should be retightened.
Therefore, resulting in a clamping action of the elevation adjustment. In this way, an
unintended elevation adjustment cannot occur.
When shooting low, the elevation adjustment screw has to be turned clockwise.
When shooting high, the adjustment takes place by turning the screw
counter-clockwise.
8.1.2 Windage adjustment
The windage adjustment of the combat sight is accomplished by means of two retaining
screws (one located on each side). The adjustment is performed by loosening one
screw and tightening the opposite screw..