Manual

12
When shooting left, the left screw has to be loosened (counter-clockwise) and the right
side screw has to be tightened. When shooting to the right, the adjustment has to be
done in the opposite order.
8.2 Model Sport
8.2.1 Elevation adjustment
Elevation adjustment occurs via the elevation adjustment screw located in the sight.
The elevation adjustment has a micrometer-click system. The elevation change of the
sight is .0016"(.042mm) per click.
When shooting too high, the sight adjustment screw has to be rotated in the clockwise
direction.
When shooting too low, the sight adjustment screw has to be rotated in the
counter-clockwise direction.
Elevation adjustment of the Sport sights.
8.2.2 Windage adjustment
The windage adjustment is effected via the windage adjustment screw at the right side
of the sight notch.
When shooting to the left, this screw has to be turned counter-clockwise. Shooting to
the right is corrected by a slight clockwise turn. A full turn of the adjustment screw (in
the case of a 6" revolver at 82' (25m) results in a change of the point of impact by
approximately 3.94" (100mm).
8.3 Model Target
Elevation and Windage adjustment