Manual

15
The barrel weight is installed underneath the barrel, by pushing it from the front at the
bottom of the barrel shroud. However before attempting this, the attaching screws have
to be backed off.
The barrel shroud, as well as the surface of attachment have to be free of oil. To avoid
damage of the barrel shroud, any dirt has to be removed. Then, the barrel weight can
be pushed on the barrel shroud. Preferably, the barrel weight should be installed so
that it aligns itself with the front edge of the barrel shroud. Now, the clamping screws
are tightened evenly with the included .118" (3mm) Allen wrench.
During shooting, one should periodically check that the barrel weight is secure.
10.2 Trigger shoe
The trigger shoe is attached to the trigger by a clamp screw at the side. For mounting,
the hammer has to be cocked. This puts the trigger in its back position. The trigger
shoe can be easily put on the trigger. Before final tightening of the trigger shoe with
the clamp screw, the trigger should be put back into its forward (D.A.) position. Install
the trigger shoe in such a way that it does not touch either the frame or the trigger
guard, otherwise, the trigger shoe might hinder the travel of the trigger. This will also
result in improper rotation of the cylinder.
10.3 Screwdriver set
On request, you can order a set of 4 screwdrivers. We intentionally manufacture our
screw slots more narrow than the regular DIN-norm, which makes the use of regular
tools difficult. Therefore, the correct screwdrivers have to be specially manufactured,
ergo resulting in a relatively high price.
11. Gun maintenance
To ensure perfect functioning of your weapon over time, a periodic gun maintenance is
absolutely necessary.