Manual

27
to create a glare-free line of sight. A milled front sight is installed and all parts are
sandblasted to provide a matte finish.
Sight adjustment:
When performing the elevation adjustment, it is advisable to loosen one of the side
retaining screws. This will alleviate the side tension and facilitate the adjustment. After
making the desired adjustment, the previously loosened side retaining screw must be
re-tightened. Windage adjustment is effected via the two side retaining screws. If the
resulting shots are too far to the left, then loosen the left retaining screw and tighten the
right retaining screw. In this way, the sighting comb is relocated to the right. If the
resulting shots are too far to the right, then the opposite procedure is performed.
Cylinder opening lever:
This handgun has a cylinder release lever located to the right, adjacent to the hammer.
The primary advantages of this arrangement lies in the faster, easier and safer use of
the weapon. When this release lever is activated (pushed forward) via the thumb, the
cylinder is unlocked. Now, by means of your right index finger, one can swing the
cylinder out. The left hand can push on the ejector rod, thereby pushing out the spent
cartridge cases. Fast reloading is accomplished, and in this manner, the positioning of
the revolver in the marksman’s hand is not altered. This uninterrupted grasp of the
weapon equates into quicker and more precise re-acquisition of the target, as well as
safer handling.
Cylinder / crane removal:
When the cylinder is swung out, the spring loaded button (located on the right side of
the frame) can be pushed, thereby releasing the crane. While holding this button in,
remove the cylinder / crane assembly from the weapon by moving it forward. When
replacing the cylinder / crane assembly, press and hold the release button while
inserting the assembly. Once fully installed, release the button. This will re-lock the
cylinder / crane to the frame of the revolver.
Warning!
Make sure the revolver is unloaded and safe, prior to any procedural instructions or
handling of the firearm! Unloading and safety features can be found in sections #5 and
#6 of this manual.
Additional Warnings!
Be a safe shooter….. read these warnings before you use this firearm!