Specifications

Qualcomm QCC3020, ultra-low power consumption, support APTX HD
decoder chip
Bluetooth 5.0 chip with independent operation
Smart audio is quickly converted, the audio track is more comfortable, and the
call is clearer
Just like face-to-face communication, restore the true sound quality!
Charge
1. Turn on the first time (or not use for a long time), please charge the
earphones and charging box before use. Put the earphones in the charging
box,and connect the Type-C cable to charge for about2 hours. When the
earphonesare in the charging state, the charging orange LED light will be on.
When the charging is saturated, the orange LED light will turn into a green light,
and then automatically turn off after 60 seconds.
2. During charging ofthe charging box, there are three white LED lights on the
Type-C interface side ofthe charging box to display the power. The LED lights
will flash different numbers ofLED lights according to different power levels.
While charging, the first LED light flashes to indicate that there is less than 30%
of the power. When the first LED light is on, the second LED light flashes,
indicating there is 30%-60% of the power; when the first two LED lights are on,
the third LED lights flashes, indicating there is 60%-99% of the power. When
the charging box is fully charged, the three LED lights are allon and
automatically extinguish after 60 seconds. In this case, disconnect the
charging box from the charging device.
3. The charging box has a built-in battery. After the charging box is fully
charged, the charging box can be turned on to directly charge the earphone
without connecting.When the earphone is fully charged, the charging box’s
orange LED power light will turn into a green LED light, and will automatically
turn off after 30 seconds.
4. This product does not come with a Type-C charging transformer. You can