User Manual

Bluetooth A/V Transmitter
(Package A)
-
1—Check the package contents
The Bluetooth ships with two package configurations: Package A and Package B. Unpack
the contents of the package you purchased and check that the following items are included:
Audio Cable
(
Packa
g
e A
)
Quick Guide Power Adapter
Bluetooth A/V Transmitter
(Package A)
Bluetooth Audio Dongle
(Package B)
6—Wait for devices to connect
The devices connect (pair) after 90
seconds. The blue power/link LEDs on
both headset and transmitter flash when
connected.
5—Pair with Bluetooth Headset (cont.)
You can pair the Bluetooth Headset with an
Audio Dongle attached to your computer.
1. Plug the Audio Dongle into a USB port
on your computer and ensure Bluetooth is
running on the computer.
2. Power on your Bluetooth Headset.
2—Charge the battery
The battery lasts eight hours and is recharged
using the power adapter or the USB cable. To
recharge:
Plug the USB cable into the DC jack on the
Bluetooth Headset and connect the other end to
your PC.
[or]
Plug the power adapter into the DC jack on
the Bluetooth Headset and connect the other
end to an electrical outlet.
Note: Before first use, charge the battery
fully for ten hours. Thereafter, recharging
takes 90 minutes.
3—Turn on the powe
r
To turn on the power, press and hold the
power button (about 3 seconds) until the power
LED lights blue.
To turn off the power, press and hold the
power button (about 3 seconds) until the power
LED turns off.
Link LED power is on
Link LED flashing connected to device
Charge LED battery is charging, turns off
when charged
Low Battery LED battery is low, recharge
before LED turns off
4—Pair with Bluetooth Headset
The Bluetooth Headset can be used with a
Bluetooth A/V Transmitter or Bluetooth
Audio Dongle. On first use, the devices
must be paired.
To pair the devices:
1. Connect your transmitter to an audio
device.
2. Power on your Bluetooth Headset.
3. Power on the transmitter.
Bluetooth A/V Headset