User Manual

14
—
Standards Bluetooth specification V1.2 compliant
Bluetooth A2DP profile (AV Profile)
Headset and Hand free profile
Power save mode (power sleep mode)
AVRCP profile
Frequency Band 2402 ~ 2480 MHz
Tx Power 0.25 ~ 2.5mW (Bluetooth Power Class II)
Rx Sensitivity < -80dBm (BER 0.1%)
Distance > 10m (open space)
Audio Streaming Format SBC 48.000 kHz
Audio Frequency Range 20Hz ~ 22 kHz
Audio S/N > 85dB
Audio THD < -83dB
Audio Output Power > 20mWrms
Power supply Rechargeable battery
Physical Specification: Dimension: TBD (max), TBD (min)
Weight: TBD gm
Environmental Range: Operating temperature:-10 ~ +50° C
Humidity: Relative humidity 0 ~ 95%
Volume Up Switch UP: volume up
Volume Down Switch Down: volume down
Play switch Play/Pause/Answer
Reset Switch Hardware reset button
Power Switch Reject/Reconnect. Press 3 sec for Power on/off
Mute switch Mute On/Off
Power charge 0.8 DC in connector.
Audio MIC input Build-in MIC
LINK LED
Power On:
Red On 3 seconds after power on delay 3 seconds then led Off.
Link Status:
Discovery: Blue on
Linked: Blue blinking
AV Linked: LED flash twice a time in every 2 sec
HS/HF Linked: LED flash once a time in every 2 sec
Low battery LED Low Battery Indicator: Red blinking 0.3 seconds On, 2 seconds Off.
Charge LED Charge Led: Steady on Red
7—Using with your mobile phone
The Bluetooth Headset can be used with a
Bluetooth-enabled mobile phone.
To pair with your phone
1. Enable Bluetooth on your phone (refer
to the phone’s user manual).
2. Turn on the headset. Check that no other
device connects with the headset by
confirming that the power/link LED is not
flashing.
3. In the phone’s Bluetooth menu, search for
devices.
4. Select KBT1 Headset.
5. Enter the PIN code “0000”.
Answering calls
To answer a call, push the play button. To
end a call, push the power button again.
10—Configuring BTAUDIO audio output
1. Open Control Panel and
double-click Sound and Audio
devices.
2. Select the Audio tab.
3. Under Sound playback, change
the device to BTAUDIO.
4. Under Sound recording, change
the device to BTAUDIO.
5. Click OK.
13—Troubleshooting
If the Bluetooth Headset does not work, try
the following:
− Ensure connecting devices are charged
− Turn off all devices and then turn them on in
the order shown in this guide
− Ensure devices are within the 10-meter
range
− If the Bluetooth Headset cannot be pow-
ered off, press the reset button.
The transmitter will auto-pairing with the
headset when power on. If you want to use
another headset, please turn the transmitter
off/on again.
8—Using IVT BlueSoleil
™
To use the IVT BlueSoleil, first you must pair the Bluetooth Headset with your
computer.
1. Ensure Bluetooth is running on your computer.
2. Power on your Bluetooth Headset.
Note: The IVT BlueSoleil software is not included with your Bluetooth Headset.
11—Using WidComm® Bluetooth software
To use the WidComm Bluetooth software, first you
must pair the Bluetooth Headset with your
computer.
1. Ensure Bluetooth is running on your com-
puter.
2. Power on your Bluetooth Headset.
Using the AV Profile to play audio
1. Double-click the WidComm icon in the
task tray.
2. Click Search for devices in range.
3. Double-click the Stereo Headset icon.
4. Click Audio Sink on Stereo Headset to
create a connection shortcut.
Note: The WidComm Bluetooth software is not included with your Bluetooth
Headset.
9
—
Using profiles
Using the AV Profile to play audio
1. Double-click the BlueSoleil icon in the
task tray.
2. Press F5 to search for Bluetooth devices.
3. Double click the KBT1 Headset icon.
4. Click Bluetooth AV Service to create a
connection shortcut.
Using the Headset Profile to play Skype
™
1. Double-click the BlueSoleil icon in the
task tray.
2. Press F5 to search for Bluetooth devices.
3. Double click the KBT1 Headset icon.
4. Click Bluetooth Headset Service to cre-
ate a connection shortcut.
12
—
Configuring Widcomm audio output
1. Open Control Panel and double-
click Sound and Audio devices.
2. Select the Audio tab.
3. Under Sound playback, change
the device to Bluetooth High Qual-
ity Audio.
4. Under Sound recording, change
the device to Bluetooth High Qual-
ity Audio.
5. Click OK.