Installation Sheet

ManualsBrandsKovacs ManualsCeiling LightsKovacs LED 8" Wide Flush Mount Light from the LED Flush Mounts Collection

INSTALLATION INSTRUCTIONS

Item #P841-609-L/P841-044-L/P841-674B-L

P842-609-L/P842-044-L/P842-674B-L (For Trim Ring Model)

READ AND SAVE THESE INSTRUCTIONS

WARNING! SHUT POWER OFF AT FUS E OR CIRCUIT BREAKER.

AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.

Page: 1/2

Fig. 1

Set#A-019A

- Mounting plate

- Spring*2

ASSEMBLING THE TRIM RING (Fig.1)

1. Shut off power at the fuse box or circuit

breaker box. If necessary remove the old

fixture and mounting hardware.

2. Carefully unpack your new fixture and lay out

all the parts on a clear area. Take care not to

lose any small parts necessary for installation.

INSTALLATION (Fig. 1)

1. Connect the fixture ground wire to the

mounting plate (D) using the green screw

provided.

2. Insert mounting plate (D) into spring (C).

Then if recessed can has socket (K),

screw pigtail (E) to recessed can socket

(K), plug the wire quick connector (F) into

wire quick connector (G). Otherwise,

directly connect wire quick connector (R)

into wire quick connector (G)

3. Push spring clip (H) into the “L” tabs (L)

protruding from the inside of the recess

housing.

Your installation is now complete turn power back

on.

Attention:

The recessed cans model no. are Halo brand:

H750RICAT, H7RICAT, H7ICT, H7RICT and

H7ICAT.

And Commercial Electric brand: CAT7ICATA

Set#

-Mounting plate

-Ground screw

-Mounting screw*2

Set#

-Mounting plate

-Ground screw

-Mounting

screw*2

Summary of content (2 pages)

PAGE 1
INSTALLATION INSTRUCTIONS Item #P841-609-L/P841-044-L/P841-674B-L P842-609-L/P842-044-L/P842-674B-L (For Trim Ring Model) READ AND SAVE THESE INSTRUCTIONS W A R N I N G ! S H U T P O W E R O F F AT F U S E O R C I R C U I T B R E A K E R . AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR. ASSEMBLING THE TRIM RING (Fig.1) 1. Shut off power at the fuse box or circuit breaker box. If necessary remove the old fixture and mounting hardware. 2.
PAGE 2
INSTALLATION INSTRUCTIONS Item #P841-609-L/P841-044-L/P841-674B-L P842-609-L/P842-044-L/P842-674B-L (For Flush Mount Model) W A R N I N G ! S H U T P O W E R O F F AT F U S E O R C I R C U I T B R E A K E R . AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR. PREPARATION 1. Shut off the power at the fuse box or circuit breaker. If necessary, remove the old fixture, including the mounting hardware. 2. Carefully unpack the new fixture and lay out all the parts on a clear area.