Switch User's Manual

Command Character ASCII note
IN１ Ａ ４１Ｈ
IN２ Ｂ ４２Ｈ
IN３ Ｃ ４３Ｈ
IN４ Ｄ ４４Ｈ
IN５ Ｅ ４５Ｈ
IN６ Ｆ ４６Ｈ
IN７ Ｇ ４７Ｈ
IN８ Ｈ ４８Ｈ
DISPLAY_POWER Ｉ ４９Ｈ
POWER_CONT Ｊ ４ＡＨ
OPTION_A Ｋ ４ＢＨ
OPTION_B Ｌ ４ＣＨ
OPTION_C Ｍ ４ＤＨ
OPTION_D Ｎ ４ＥＨ
OPTION_E Ｏ ４ＦＨ
OPTION_F Ｐ ５０Ｈ
IN_OFF Ｑ ５１Ｈ
IN_ON Ｒ ５２Ｈ
ＣＡＴ５ 1 ３１Ｈ
ＳＵＢ 2 ３２Ｈ
ＯＮ 3 ３３Ｈ
ＯＦＦ 4 ３４Ｈ
ＣＡＴ５，ＯＮ 5 ３５Ｈ
ＣＡＴ５，ＯＦＦ 6 ３６Ｈ
ＳＵＢ，ＯＮ 7 ３７Ｈ
ＳＵＢ，ＯＦＦ 8 ３８Ｈ
Reading data
Ｗ
５７Ｈ
Pause
，
２ＣＨ
Semicolon
； ３ＢＨ
Return
０ＤＨ Remark 7
Remark 1
Remark 1
Remark 3
Remark 4
Remark 5
Remark 6
Remark 2
Remark 2
ACK
０６Ｈ Remark 8
NAK
１５Ｈ Remark 8
Remark 1 : This character is used to select output.
Remark 2 : This character is used when POWER CONT, OPTION are ON/OFF.
Remark 3 : This character is used to select output (CAT5) when DISPLAY POWER is ON.
Remark 4 : This character is used to select output (CAT5) when DISPLAY POWER is OFF.
Remark 5 : This character is used to select output (SUB) when DISPLAY POWER is ON.
Remark 6 : This character is used to select output (SUB) when DISPLAY POWER is OFF.
Remark 7 : no character Only ASCII code , not described by character.
Remark 8 : "ACK" is answer backing. When this product was able to receive the command,
it returns "ACK."
"NAK" is answer backing. When this product was not able to receive the command,
it returns "NAK."
-17-
5-3. Control and registration method
5-3-1. Control method
Control method code table (video audio synchronization)