User's Manual

Loop Mode (Life Test)
Life test (Loop test):
1. After entering the life test, set the speed, time, temperature, and forward and
backward rotation of blade, and click “Add steps”.
(You need to add at least two steps for cyclic operation.)
2. Click [Save], and a pop-up box “Whether to save current recipe” will appear.
Click [OK], and “Recipe saved successfully” will appear.
3. Click [Reset one] to delete a step, and click [Reset all] to delete all steps.
4. The saved data appear in the list on the left, and the corresponding parameters
appear on the right.
5. After inputting the number of cycles in “The number of cycles to be cycled”,
click [Start] to start cycling in turn and check whether the “Running time” and
the “Running cycle” are correct.
Add
Back
Please add steps.
Speed Time Temperature
Backward rotation
Add one step
Reset one step
Reset all steps
Save