Instructions / Assembly

page 4
A x4
L x4
1#
x12
A
L
1#
1#
1#
Parts Required:
Step 1:
Set up poles (Part A) with stand plates (Part L) using screws 1#
as shown in diagram.
X4
1.If the deck is hard wood and the depth of it
is over 3 inches,you can use 5/16in. x 4 in.
structural wood screw to secure the gazebo.
2.If the ground is concr
e
t
ed and the depth of
it is over 3 inches, you can buy Diameter
3/8" x3" length Sleeve anchors.
X12
X12
3 inches
3/8
inches
M6
(Not included)
(Not included)
A
L
Reference for anchoring gazebo:
Attn: After completing assembly, If it is often strong wind in your location during bad weather or
when the wind scale reaches level 5 or above it, please reinforce it as is shown above .