SDS

Page 1 of 3



SAFETY DATA SHEET

PVC Cement

Product: PVC Cement

Common Name: PVC Cement

Manufacturer: Plastmo Div. of KP Building Products

255 Summerlea Rd.

Brampton, ON

L6T 4T8

(905) 793-9462

Product Use: PVC bonding

Emergency Tel.: 1-888-793-9462

Overview: Thick cloudy liquid, strong THF odour, flammable liquid. Toxic if absorbed through the skin. Irritating to the

eyes, skin and respiratory system.

Routes of Exposure: Inhalation, eye and skin contact.

Inhalation: Will cause irritation to the respiratory tract. Overexposure to vapors may cause CNS effect:

nausea, vomiting, headache and dizziness.

Eyes: Risk of serious eye damage.

Skin: Irritating to skin.

Ingestion: May cause severe irritation of the gastrointestinal tract and CNS effects.

Ingredient % (W/W) CAS Number

Tetrahydrofuran 40-70 109-99-9

Cyclohexanone 10-30 108-94-1

Inhalation: Move to fresh air. Assist in breathing if necessary. Seek medical attention if irritation occurs.

Eye Contact: Flush open eyes with water for 15 minutes. Seek immediate medical attention.

Skin Contact: Remove affected clothing. Wash skin with soap and water immediately. Wash contaminated

clothing before re-use. Seek medical attention if irritation occurs.

Ingestion: Seek Medical attention immediately. Do not induce vomiting. Rinse mouth with water. Never give

anything by mouth to an unconscious person.

Extinguishing Media: CO

2, chemical foam, dry chemical, water spray.

Equipment/Instructions: Self-contained breathing apparatus and full protective clothing should be worn by fire fighters.

Flammable Properties: Isolate from heat, sparks and open flame.

Containment Procedure: Cover spill with absorbent material. Do not use a combustible material such as sawdust.

Transfer to a container for disposal. Keep container tightly closed.

Clean-up Procedure: Decontaminate area with detergent and water.

1.IDENTIFICATION

2.HAZARD IDENTIFICATION

3.COMPOSITION/INFORMATION ON INGREDIENTS

4.FIRST-AID MEASURES

5.FIRE-FIGHTING MEASURES

6.ACCIDENTAL RELEASE MEASURES

PAGE 1
SAFETY DATA SHEET PVC Cement 1.IDENTIFICATION Product: PVC Cement Common Name: PVC Cement Manufacturer: Plastmo Div. of KP Building Products 255 Summerlea Rd. Brampton, ON L6T 4T8 (905) 793-9462 Product Use: PVC bonding Emergency Tel.: 1-888-793-9462 2.HAZARD IDENTIFICATION Overview: Thick cloudy liquid, strong THF odour, flammable liquid. Toxic if absorbed through the skin. Irritating to the eyes, skin and respiratory system. Routes of Exposure: Inhalation, eye and skin contact.
PAGE 2
7.HANDLING AND STORAGE Handling: Storage: Handle material in a manner to prevent damage. Store in tightly-sealed containers in a cool, dry area. 8.EXPOSURE CONTROLS/ PERSONAL PROTECTION Ingredient Tetrahydrofuran Cyclohexanone Exposure Limit 200 (OSHA PEL) 20 (ACGIH TWA) Unit ppm ppm Engineering Controls: Use local exhaust ventilation to keep vapor concentrations below TVL. Personal Protective Equipment Eye/Face/Hand: Tightly fitting chemical goggles; face shield if risk of splashing is present.
PAGE 3
12.ECOLOGICAL INFORMATION Biodegradability: Not readily biodegradable 13.DISPOSAL CONSIDERATION Recover or recycle if possible. Uncured product is hazardous waste. Incinerate in accordance with federal, state, and local environmental controls/ regulations. Dispose of cured non-hazardous product in accordance with the same regulations. All provided information only applies to the material as supplied to the user.