Operation Manual
17
GB
ENGLISH
Technical Data
Electric heater GEH 3 F
Art. No ................................................................................................................................................................................................05175
Service connection ..................................................................................................................................................230 V~50 Hz
Max. Power .................................................................................................................................................... 3 kW (2580 kcal./h)
Heating degrees .............................................................................................................................................................1,5+3 kW
Current consumption ....................................................................................................................................................... 13,04 A
Fan power ..........................................................................................................................................................................480 m/h
Weight .......................................................................................................................................................................................4,9 kg
Read and understand the operating instructions
before using the appliance. Abide by all the safety
measures stated in the service manual. Act responsib-
ly toward third parties.
In case of any doubts about connection and operati-
on refer please to our customer center
Specied Conditions Of Use
Electric heaters are used in construction, shipbuilding, ag-
riculture, car repair services, gastronomy, installations and
where oil or gas heaters are not required or permitted.
The device must be fully assembled and standing
only on the ground or used with the included wall or
ceiling mount. Operating on an unstable surface is not
permitted.
Do not use this product in any other way as stated for
normal use. Respecting technical data and safety pre-
cautions.Not observing general regulations in force
and instructions from this manual does not make the
manufacturer liable for damages.
Power tool description
1. Handle
2. Wall or ceiling mount
3. Protective grille
4. Remote control
5. Sensor switch
6. ON/OFF switch
7. Switch Power regulator
8. Timer
Emergency procedure
Conduct a rst-aid procedure adequate to the injury
and summon qualied medical attendance as quickly
as possible. Protect the injured person from further
harm and calm them down. For the sake of eventual
accident, inaccordance with DIN13164, a workplace
has to be ttedwith a rst-aid kit. It isessential to
replace any usedmaterial in the rst-aid kitimmedia-
tely after it has been used.
If you seek help,state the following pieces ofinfor-
mation:
1. Accident site
2. Accident type
3. Number of injured persons
4. Injury type(s)
Requirements for operating sta
The operating sta must carefully read the Opera-
tingInstructions before using the appliance.
Qualication: Apart from the detailed instructions
by aprofessional, no special qualication is necessary
forappliance using.
Minimum age: The product has been designed to be
used by persons over 16 years of age. If the product is
to be used by children below the age of 8 or persons
with reduced physical, sensory or mental skills or
with a lack of experience and knowledge, they must
be supervised or instructed in the safe use of the
appliance and understand the resulting risks. Children
must not play with the appliance. Cleaning and user
maintenance must not be performed by children
without supervision.
Children below the age of 3 must be kept away unless
being under constant supervision. Children over the
age of 3 and below the age of 8 may only turn the de-
vice on and o if supervised or instructed on the safe
use of the device and understand the resulting risks,
provided that the device is placed and installed in a
common position for use. Children in this age group
may not plug, control, clean and/or service the device.