Installation Guide
13
CABINETRY INSTALLATION, CARE AND CLEANING
DRAWER FRONT ADJUSTMENTS
If a drawer front looks crooked, first measure at each end of the drawer front to see if the height is the same. If not, slightly loosen the screws (1)
attaching the drawer front to the drawer box. Make any up, down or sideways adjustments and then tighten the screws.
NOTE: This adjustment can only be made PRIOR to installing decorative hardware (handles or knobs).
For cabinets with a 5-piece drawer head, make adjustments by removing the plastic cover and loosening the side brackets attaching the drawer head
to the side of the drawer box. Simply loosen the screw on the drawer and determine the proper up or down position, then retighten the screw.
5PIECE DRAWER HEAD ADJUSTMENTS
DRAWER FRONT ADJUSTMENTS