Datasheet

ManualsBrandsKRAM Manualscable interface/gender adapters69600

IGNI-BOX

Product Description

69600 IGNI

69600 IGNI69600 IGNI

69600 IGNI-

-BOX and IGNI

BOX and IGNIBOX and IGNI

BOX and IGNI-

-BOX adaptor

BOX adaptorBOX adaptor

BOX adaptor

The IGNI-BOX makes the need for an ignition wire, when in-

stalling aftermarket car accessories, redundant.

Many new cars do not have an easy accessible switched igni-

tion wire due to the use of Bus based vehicle control net-

works like CAN-bus. This has spawned the need for a fast

and versatile Ignition substitute.

For this reason we have invented the IGNI-BOX. This small

microprocessor controlled unit makes an artificial switched

Ignition based on the noise levels on the constant 12v wire.

To make the needed calculations the IGNI-BOX makes up to

4000 measurements pr. second.

The IGNI-BOX will switch on the ignition signal when the en-

gine is turned on. On some car models it will even turn on

the ignition signal as soon as the key is inserted into the igni-

tion barrel and that way being very similar to the normal ig-

nition functionality in older cars.

A normal IGNI-BOX item number consists of two items. The

1st item is the IGNI-BOX and the 2nd item is the IGNI-BOX

adaptor. The IGNI-BOX adaptor makes the installation plug

and play when installing a Kram Telecom cable set. Some

IGNI-BOX adaptors even exists for OEM Carkit cablesets. But

all the IGNI-BOX really needs in order to make an artificial ig-

nition signal is a connection to the constant 12v and the

ground wire. The installation is that simple.

FOR THE PROFESSIONAL INSTALLER

IGNI-BOX

FOR THE PROFESSIONAL INSTALLER

Made in Denmark by

Kram Telecom A/S

Connector configurations

+12 NC 1

- 2 3

Technical Specifications

Voltage supply range : 10-16 VDC

Current usage : <1 mA (passive)/2mA-3A (active)

Activation voltage

Active : > +10VDC

Passive : < +10VDC

Maximum current supplied by ignition:

1A. Active when High.

Measurements pr. Second: >3500

Size L x W x H: 75 x 20 x 14 mm

EN950

See our complete Radio Mute program on our website www.kram.dk

Input connector

Output connector

1 IGN NC +12

3 2 NC -

Summary of content (2 pages)

PAGE 1
IGNI-BOX IGNI-BOX FOR THE PROFESSIONAL INSTALLER FOR THE PROFESSIONAL INSTALLER Technical Specifications Product Description 69600 IGNIIGNI-BOX and IGNIIGNI-BOX adaptor Voltage supply range : Current usage : 10-16 VDC <1 mA (passive)/2mA-3A (active) Activation voltage Active : Passive : > +10VDC < +10VDC Many new cars do not have an easy accessible switched ignition wire due to the use of Bus based vehicle control networks like CAN-bus.
PAGE 2
IGNI-BOX IGNI-BOX FOR THE PROFESSIONAL INSTALLER FOR THE PROFESSIONAL INSTALLER 69600 for 2.G Drive & Talk / Interface leads Installation description IGNI-BOX and IGNI-BOX adaptor. C Needed items: A. IGNI-BOX. B. IGNI-BOX adaptor. C. Cable set. D. Carkit-adaptor. Installation: Installation steps 1 to 7 must be followed as described to ensure correct function of the IGNI-BOX. 1. Prepare the installation of the IGNI-BOX. Install the cable set C, Refer to the instruction delivered with the Cable set.