K R A ME R E LE CT R O N IC S L TD .
Contents 1 Introduction 1 2 2.1 2.2 2.3 3 3.
1 Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront video, audio, presentation, and broadcasting professionals on a daily basis.
2 Getting Started We recommend that you: Unpack the equipment carefully and save the original box and packaging materials for possible future shipment Review the contents of this user manual i 2.1 Go to http://www.kramerelectronics.com to check for up-to-date user manuals, application programs, and to check if firmware upgrades are available (where appropriate).
2.2 Safety Instructions ! 2.3 Caution: There are no operator serviceable parts inside the unit Warning: Use only the Kramer Electronics input power wall adapter that is provided with the unit Warning: Disconnect the power and unplug the unit from the wall before installing Recycling Kramer Products The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC aims to reduce the amount of WEEE sent for disposal to landfill or incineration by requiring it to be collected and recycled.
3 Overview The high performance 101L Video Line Amplifier is used for amplifying the video signal intensity and improving the image sharpness (the picture quality) when a video signal is transmitted over a long cable. In particular, the 101L features: Extra-wide bandwidth of 500MHz Gain and equalization trimmer controls to compensate for signal losses inherent in long cable runs, recessed to prevent tampering 3.1 Defining the 101L Video Line Amplifier This section defines the 101L.
4 Connecting the 101L i Always switch off the power to each device before connecting it to your 101L. After connecting your 101L, connect its power and then switch on the power to each device. To connect the 101L, as illustrated in the example in Figure 2, do the following: 1. Connect the video source (for example, a composite video camera) to the VIDEO IN BNC connector. It is recommended that you connect the 101L closer to the source than to the acceptor. 2.
5 Technical Specifications INPUT: 1 composite video, 1Vpp/75 on a BNC connector OUTPUT: 1 composite video, 1Vpp/75 on a BNC connector MAX. OUTPUT LEVEL: 2.5Vpp BANDWIDTH: 500MHz DIFF. GAIN: 0.03% DIFF. PHASE: 0.03Deg. S/N RATIO: 75dB CONTROLS: Level: -0.8dB to 6.
For the latest information on our products and a list of Kramer distributors, visit our Web site where updates to this user manual may be found. We welcome your questions, comments, and feedback. Web site: www.kramerelectronics.com E-mail: info@kramerel.
