K R A ME R E LE CT R O N IC S L T D .
Contents 1 Introduction 1 2 2.1 Getting Started Achieving the Best Performance 2 2 3 3.
1 Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront video, audio, presentation, and broadcasting professionals on a daily basis.
2 Getting Started We recommend that you: • Unpack the equipment carefully and save the original box and packaging materials for possible future shipment • Review the contents of this user manual • Use Kramer high-performance, high-resolution cables i 2.1 Go to http://www.kramerelectronics.com to check for up-to-date user manuals, application programs, and to check if firmware upgrades are available (where appropriate).
3 Overview The 6505 is a high−performance distribution amplifier for S/PDIF digital audio signals. The unit takes one S/PDIF input and distributes the signal to five identical S/PDIF outputs. The 6505 features: • Compatibility with EIAJ CP1201, IEC-60958, AES3id and S/PDIF standards • A sample frequency range of 32kHz to 96kHz • Equalization and reclocking of incoming data for low jitter recovery of the digital audio data stream • 3.
4 Connecting the 6505 i Always switch off the power to each device before connecting it to your 6505. After connecting your 6505, connect its power and then switch on the power to each device. To connect the 6505 as illustrated in the example in Figure 2: 1. Connect an S/PDIF source (for example, a DVD Player) to the S/PDIF RCA input connector. 2. Connect up to five S/PDIF RCA output connectors to up to five S/PDIF acceptors (for example, power amplifiers). 3.
5 Technical Specifications INPUT: 1 S/PDIF digital audio input on an RCA connector OUTPUTS: 5 S/PDIF digital audio outputs on RCA connectors STANDARD COMPLIANCE: CP1201, IEC-60958, AES3id and S/PDIF SAMPLE RATE: 32kHz to 96kHz INPUT IMPEDANCE: 75Ω OUTPUT IMPEDANCE: 75Ω POWER SOURCE: 5V, 120mA OPERATING TEMPERATURE: 0° to +55°C (32° to 131°F) STORAGE TEMPERATURE: -45° to +72°C (-49° to 162°F) HUMIDITY: 10% to 90%, RHL non-condensing DIMENSIONS: 12cm x 6.95cm x 2.44cm (4.72" x 2.74" x 0.
6 6505 - Technical Specifications
For the latest information on our products and a list of Kramer distributors, visit our Web site where updates to this user manual may be found. We welcome your questions, comments, and feedback. Web site: www.kramerelectronics.com E-mail: info@kramerel.
